Keyword: 'Basement Window'
Word Count: 405
Keyword Density: 5/405 x 100= 1.23%
Specially intended to be put up in a masonry foundation wall, a basement window is relatively small in size as compared to the standard in housing areas. When you select for one it would be highly recommended that the product qualifies with the outlet standards set in the local regulations. The average should be not less than 24 inches in width and 15 inches in height as suggested by the International Residential Code (IRC).
The basement window also has to have a net patent breach in a minimum of 5.7 square feet in order for the occupants to easily exit in case there are emergencies such as fire. Aside from such, it will also allow firefighters to without much hassle enter from the outside. There are a lot of manufacturers that have followed the International Residential Code (IRC) such as Jeld Wen and Weather Shield.
If you are planning to replace the old basement window you have in your quarters, gauge the existing screen and purchase one that will fit right into the space. When buying a novel item, make sure that the sill, frame and sash are included. You can even have it customized so you can have your own personality embedded on the design. However, the pane cannot be seen since it is down under.
After you have made an order, do not immediately take off the basement window when the new one has not arrived yet. You might find stray dogs around or worst, burglars might take advantage of the opportunity. On another note, if you are contemplating of positioning a dryer vent where the hose has to pass through the screen, you can remove what has been previously utilized. Just keep your eyes wide open since some parts may be stolen albeit, the pieces are not entirely expensive.
When you head to the nearest hardware store, search for any of the four categories that will suit your taste namely Jamb Depth, Nominal Width, Nominal Height and Venting Configuration.
Jamb Depth is one of the attributes that refers to the dimension of the frame unit starting from the interior to the exterior. The appropriate expression for the figures is in inches.
Venting Configuration is one of the attributes that refers to the component that you have been wanting. It actually has a lot of exhaust capabilities such as having it stationary for the air to just circulate around the room.